Flexible Resin has elastomeric properties that allow users to print bendable and compressible parts. Parts come out pliable where there are thin walls, but are resilient when there are thicker walls. It simulates an elastomer with 80 A durometer. It is a soft-touch material like silicone, and is widely used for parts that need to bend and compress.

Wearables Prototyping
Ergonomic Prototyping
Handles, Grips, Overmolds


material strengths

  • 100%


  • 100%


  • 100%


  • 100%


  • 100%


  • 100%


color options




Artboard 1@2x-100.jpg

145 mm x 145 mm x 175 mm

Our specified build volumes are the largest that we are able to print for each material.

minimum hole diameteR

0.5 mm

A hole smaller in diameter than the specified minimum may appear closed after printing.

minimum wall thicknesS

0.6 mm

A model's wall thickness must be thick enough to support the model. If it is not, warping may occur. A wall that is too thin may cause a model to break.

minimum clearancE

0.5 mm

Interlocking parts are able to be printed all at once in a single print. In order for this to work, a minimum clearance must be met for the parts to come loose and work as intended.

Minimum embossed/engraved detaiL

Artboard 5@2x-100.jpg

0.1 mm

For engraved or embossed details, a specified minimum size must be kept in order to maintain readability.

vertical wire diameteR

0.3 mm

With a tall vertical wire, warping may occur during the printing process, therefore creating an erroneous print.

horizontal bridge max lengtH

1 mm

This is the length at which an unsupported span of material can be created without utilizing supports.

Minimum angle unsupported overhanG

19 degrees

This is the angle at which the overhang sticks out. Any angle less than the specificed minimum angle must utilize supports.